OEM Cast Steel Railroad Tie Plates For Rail Construction , Rail Base Plate

OEM Cast Steel Railroad Tie Plates For Rail Construction , Rail base Plate

Good Quality Tie Plate For Rail Construction

Specifications:

A tie plate is also called a baseplate or sole plate. SUYU specializes in producing rail fastening and tie plate is one of our main products. Rail tie plate is used in rail construction to support the rails. We can offer rail tie plate made using either casting iron or casting steel for customers to choose from, depending on the load and the type of rails. Boltable as well as weldable clips can be applied. For the discontinuous type of support, we supply various ribbed tie plate which are also produced in casting iron or casting steel.

Tie plates are generally used to take the load of rail and distribute the load to the sleepers offering proven economies. We manufacture all types of base plates suitable for various rail sections, for use on wooden, steel or concrete sleepers and ballast-less tracks used with elastic fastenings on wooden sleepers and 'K' type fastening system.

Cast iron can be the welded or fabricated type, depending upon the customers requirements. Our rail tie plate can be made to suit various rail section, i.e. UIC 60, UIC 54, RN 45, 90 A, etc.

Tie plate or sole plates are needed in rail installation, as they not only support the rails, but also enable the entire fastening system to be fixed on. Rail tie plates are the uppermost component of a crane rail or track support system. The primary function of a tie plate or sole plate is to provide the rail with a flat, smooth resting surface while allowing for vertical alignment of the rail system. Tie plates are secured by Anchor Bolts, also known as Holding Down Bolts. Soleplates are typically installed with a layer of grout cast beneath, which fills the void between the soleplate and the concrete foundation.

The holes for bolting the anchor and leveling bolts, and holes for bolt through clips if present, are precisely drilled into the sole plates. For weldable clips and base clips, the bottom of the clip is welded onto the sole plates before galvanizing.

We can manufacture any quantities big or small and try to accommodate our customer requests, although it is more economical to manufacture larger quantities.

Below are some examples of rail tie plate we have manufactured over the last several years.

Type	Dimension	Holes	Incline	Rail	Weight(Kg)
Rph 1/160	345/285/127/160x15/13	Ø 26 (4x)	1:40	S 49/S 54	7,86
Rp 01/01/160	345/285/127/160x15/13	Ø 26 (4x)	1:40	S 49/S 54	7,70
Rph 1/210	345/285/127x210x15/13	Ø 26 (4x)	1:40	S 49/S 54	10,55
Rph 1/210	345/285/127x210x15/13	Ø 36,3 (2x)	1:40	S 49/S 54	10,55
Rph 1/210 FVZ	345/285/127x210x15/13	Ø 26 (4x)	1:40	S 49/S 54	10,69
Sph 1(a)	345/350/127x410x15/13	Ø 26 (8x)	1:40 OEM Cast Steel Railroad Tie Plates For Rail Construction , Rail Base Plate Inquiry		Sell No Category New Login Logicstics Miracle Movers Markham Miami Movers for Less Miracle Movers Toronto Hansen Bros. Moving & Storage Newcastle Pack & Go Movers Spyder Moving and Storage Denver United Nursing Services Jiaxing Hengchuang Packaging Technology Co., Ltd. Helix Transfer and Storage Northern Virginia Zapt Movers Spyder Moving and Storage Colorado Springs Big Mans Moving Company Wenling Sanxing Medical Plastic Mold Helix Transfer and Storage Hansens Moving and Storage TrueBlue Exhibits Four Winds Saudi Arabia Jubail Four Winds Saudi Arabia Yanbu Four Winds Saudi Arabia Dammam Company QR code Anytime Anywhere Mobile